Shop

Saldatrice TELWIN Tig 222

€ 1050,00

Saldatrice TELWIN Tig 222 Saldatrice Tig  AC DC - Tig pulsato - MMA Speciale per alluminio  TIG AC Praticamente nuova usata pochissimo

PICkit 4 In-Circuit Debugger/ Programmer

€ 35,00

USATO The MPLAB® PICkit™ 4 now has Programmer-to-Go functionality for 8-bit, 16-bit and 32-bit PIC MCUs and dsPICs and also SAM MCU devices . The firmware update comes with MPLAB X IDE v5.30. The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC®, dsPIC®, AVR, SAM and CEC flash microcontrollers (MCUs) and microprocessors (MPUs), using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE), starting with version 4.15. The MPLAB PICkit 4 is connected to the design engineer's computer using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming™ (ICSP™). An additional micro SD card slot and the ability to be self-powered from the target means you can take your code with you and program on the go. The MPLAB PICkit 4 programs faster than its predecessor with a powerful 32-bit 300 MHz SAME70 MCU and comes ready to support PIC®, AVR, SAM and dsPIC® MCU and MPU devices. Along with a wider target voltage, the PICkit 4 supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway, while being backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP. The PICkit 4 also has a unique programmer-to-go function with the addition of a micro SD card slot to hold project code and the ability to be powered by the target board.

D540-406E30

€ 230,00

Radiomodem 868 Mhz con antenna integrata  linea dati RS485 Disponibili solo 2 pezzi Code: D540-406E30 : D5 series Frequency: 868 MHz RF Max Power: max. 500 mW ERP (software configurable) Use / Certification: CE - free use in Italy and some European countries (SRD device compliance to ERC70-03) Serial Port: RS485 Input / Output: na Housing: IP65 fiber glass resin housing RF Connection: integrated antenna Antenna type: integrated dipole Lambda/2 Data Sheet  

VEK MNE1-R24-A

€ 99,50

Il modello VEK MNE1 è un rilevatore di loop plug-in a canale singolo  (presa a 11 PIN UNDECAL non inclusa),  Feig Rilevatore di spira elettronico per loop singolo con due uscite relè Rilevatore di spira per veicoli con due uscite relè.   Applicazione del prodotto  - Parcheggi  - Controllo accessi  - Sicurezza  - Rilevamento carrelli elevatori  - Conteggio veicoli DATI TECNICI FEIG VEK MNE1 -R24-A  Rilevatore elettronico di loop Feig Dimensioni (L x A x P) 38 (1,5") x 76 (3") x 71 mm (2,8")  Alloggiamento Plastica, spina a 11 pin  Alimentazione 10-30 V AC-DC  1W Intervallo di induttanza 20-700 µH  Frequenza operativa 30-130 kHz (2 gradini)  Intervallo di sensibilità 0,02 % - 1,3 % ?f/f (4 gradini)  Ingresso loop max 200 m  Uscite di segnale  VEK MNE1 1 relè permanente con commutazione (segnale uscita invertibile),  1 relè a impulsi con contatto NO  Potenza di commutazione max 60 W / 125 VA  Tensione di commutazione max 230 V CA  Corrente di commutazione max 2 A  Intervallo di temperatura da –37°C a 75°C I rilevatori di loop Feig Electronic serie VEK-MNE sono disponibili anche nella versione a bassa tensione

Batteria 4G Tenda

€ 8,00

Batteria di ricambio 4G185 4G180 compatibile con Tenda 4G185 Mobile WLAN Router 4G LTE Router & Tenda 4G180 Mobile WLAN Router  3.8V 2100mAh  7.98Wh Standard GB/T18287-2013

G6A-434P-ST-US-DC24

€ 35,00

G6A-434P-ST-US-DC24 RELAY GEN PURPOSE 4PDT 1A 24V Must Operate Voltage   16.8 VDC Must Release Voltage    2.4 VDC Operate Time            7 ms Release Time            5 ms Operating Temperature   -40°C ~ 70°C Contact Material        Silver Palladium (AgPd), Gold (Au) Coil Resistance         1.6 kOhms Base Product Number     G6A-434 Data Sheet  

JUMPER 05ZR-8M-P - 05ZR-8M-P 2

€ 1,00

JUMPER 05ZR-8M-P - 05ZR-8M-P 2

Sensirion SPS30

€ 39,00

Sensirion SPS30 Particulate Matter (PM) Sensor features a measurement principle based on laser scattering and uses Sensirion's innovative contamination-resistance technology. This technology, together with high-quality and long-lasting components, enables accurate measurements from the device's first operation throughout its lifetime of more than eight years. Advanced algorithms provide superior precision for different PM types and higher-resolution particle size binning. This allows the detection of different sorts of environmental dust and other particles. With dimensions of only 41mm x 41mm x 12mm, the SPS30  is ideal for applications where the size is of paramount importance, such as wall-mounted or compact air-quality devices.

SB612A PIR Motion Detector Module

€ 3,00

SB612A PIR Motion Detector Module SB612A is a pyroelectric sensor module which developed for human body detection. An integrated PIR sensor combined with a fresnel lens which is mounted on a compact PCB, and limited components to form the module. Delay time, lux is adjustable MAX 8 mt  115° Data Sheet